Placing GCPs in RTK mode¶
To place GCPs with Reach units follow the steps from this guide.
Setting RTK on Reach RS2 base and rover over LoRa radio
If you have 2 Reach RS2, this video will guide you on how to set them up in RTK:
Setting RTK on Reach RS+ base and rover over LoRa radio
If you have 2 Reach RS/RS+, configure RTK by following "Base and rover setup" video guide:
Setting RTK on Reach rover over NTRIP
If you have just one Reach receiver, you need to connect it to NTRIP first. Check this guide for more details
Create a project¶
Create a project in ReachView Survey tool by following "Creating New Project" guide.
Put your pole in the center of the target.
Level your pole using a bubble level.
In ReachView Survey tool press the Collect button and save your GCP. Repeat the procedure for as many GCPs as you need.
- Specify the GCPs data format which your GIS or photogrammetry software can handle
- Export your project file in one of the suitable formats