Power supply
Reach RS/RS+ has built-in LiFePO4 battery providing 30 hours of operating time.
Charging over USB
You can power and charge Reach RS/RS+ over the micro-USB cable using power supplies like:
- Power bank
- USB wall adapter
Powering Reach RS+ from the external connector
note
Works for Reach RS+ only.
Reach RS+ can automatically turn on when the power is supplied to the device via an external 9-pin bottom connector with a voltage in the range from 5 V to 40 V.
To charge the receiver 5 W is required. For operating, 7.5 W on average is required (10 W maximum).