Specification
Overview
Performance specs
Datasheet for Reach RX [PDF, 6 MB]
Mechanical specs
| File name | Download link |
|---|---|
| Reach RX general drawing | reach-rx-drawing [PDF, 807 KB] |
| Reach RX 3D model in STEP format | reach-rx [STEP, 38.6 MB] |
| Reach RX 3D model in IGES format | reach-rx [IGES, 43.7 MB] |
Antenna height specs
GNSS antennas are precisely calibrated through the National Geodetic Survey measurements. These calibrations define the antenna phase centre (APC).
In Emlid Flow and Emlid Studio, you don’t need to worry about APC values, as the software automatically applies the correct phase-centre offset. You only need to enter the height measured from the ground to the antenna reference point (ARP) on the bottom of the receiver.
The phase center offsets of Reach RX L1 and L2 are 147.1 mm and 149.0 mm, respectively. If you need more details about Reach RX antenna calibration, check out the ANTEX file.