Skip to main content

Power supply

Reach RS2 has built-in LiFePO4 battery providing up to 22 hours of autonomous work when logging data and up to 16&nbsphours as a 3.5G rover.

Charging over USB​

You can power and charge Reach RS2/RS2+ over USB-C cable using power supplies like:

  • Power bank
  • USB wall adapter

Powering Reach RS2/RS2+ from the external connector​

Reach RS2/RS2+ can automatically turn on when the power is supplied to the device via an external 9-pin bottom connector with a voltage in the range from 6 V to 40 V. You can enable this feature in the Emlid Flow settings.

To charge the receiver 5 W is required. For operating 7.5 W on average is required (10 W maximum).