Atualização do firmware do Reach

Este guia explica como atualizar o firmware do Reach RX utilizando a Reach Firmware Flash Tool.

Instalação da Reach Firmware Flash Tool

note

You can update Reach RX firmware directly from the Emlid Flow app using the Updater tool starting with firmware version 1.6 and app version 11.11 for iOS or 11.10 for Android.

O Atualizador é uma ferramenta do Emlid Flow que ajuda a atualizar o firmware do seu receptor. O firmware refere-se ao programa de fundo que executa o seu receptor e requer atualizações para atualizar o receptor com novas funcionalidades, otimizar o seu desempenho e protegê-lo de vulnerabilidades.

When an update is available, a red dot appears next to the Settings cell.

tip

Recomendamos a atualização do firmware sempre que ela estiver disponível.

Atualize o firmware

note

Make sure that you mobile device is connected to the internet.

To update the receiver, follow the steps below:

1. Open Emlid Flow and connect to your Reach RX.

   

2. In Settings, tap Firmware updates. You'll see the available update version and size.

   
   

3. Tap Start update. The Reach RX LED will turn solid blue while the app downloads and installs the update.

   note

   Keep the app open and the receiver connected during the update.

   

4. After the update completes, wait for Reach to reboot. The LED will turn solid white when it is ready.

   

5. In the Receivers list, reconnect to your Reach RX.

Your Reach RX is now ready to use.