Czech Republic
Rover Setup
Coordinate System
Choose a coordinate system based on the S-JTSK
datum (such as S-JTSK / Krovak inverse v1710
).
Vertical Datum
Choose the Czech_CR-2005_v1005
vertical datum.
The CR2005
geoid is used to perform the transformation.
Base Setup
Your base or NTRIP service should be in ETRS89
. The following methods are used to perform the datum conversion: Helmert (7-parameters)
, cz_cuzk_table_yx_3_v1710_east_north
grid.
When setting up a base station on a benchmark, enter ETRS89
geographic coordinates (lat/long) and ellipsoidal height in the Emlid Flow Base settings.