Austria
Rover Setup
Coordinate System
Choose a coordinate system based on ETRS89
(such as ETRS89 / Austria Lambert
), MGI
(such as MGI / Austria East Zone
), or MGI
(such as MGI / Austria East Zone (2021)
) datums.
Vertical Datum
Choose one of the available vertical datums:
EVRF2000 Austria height
GHA height
The following geoids are used to perform the transformation:
GEOID_GRS80_Oesterreich
GV_Hoehengrid_plus_Geoid_V
Base Setup
Your base or NTRIP service should be in ETRS89
. The following methods are used to perform the datum conversion: AT_GIS_GRID
grid, AT_GIS_GRID_2021
grid.
You can't use this datum conversion from ETRS89
to MGI
for cadastral purposes. It does not comply with the rules for control network tie-in as per Paragraph 3 of the Land Survey Regulations (Vermessungsverordnung) 2010.
When setting up a base station on a benchmark, enter ETRS89
geographic coordinates (lat/long) and ellipsoidal height in the Emlid Flow Base settings.