Skip to main content

Power supply

Reach RS/RS+ has built-in LiFePO4 battery providing 30 hours of operating time.

Charging over USB​

You can power and charge Reach RS/RS+ over the micro-USB cable using power supplies like:

  • Power bank
  • USB wall adapter

Powering Reach RS+ from the external connector​

note

Works for Reach RS+ only.

Reach RS+ can automatically turn on when the power is supplied to the device via an external 9-pin bottom connector with a voltage in the range from 5 V to 40 V.

To charge the receiver 5 W is required. For operating, 7.5 W on average is required (10 W maximum).