Skip to main content

Placing GCPs in RTK mode

Video guide#

This tutorial will show how to place GCPs with Reach units.


Text guide#

Configure RTK#

Setting RTK on Reach RS2 base and rover over LoRa radio

If you have 2 Reach RS2, this video will guide you on how to set them up in RTK:


Setting RTK on Reach RS+ base and rover over LoRa radio

If you have 2 Reach RS/RS+, configure RTK by following "Base and rover setup" video guide:


Setting RTK on Reach rover over NTRIP

If you have just one Reach receiver, you need to connect it to NTRIP first. Check this guide for more details

Create a project#

Create a project in ReachView Survey tool by following "Creating New Project" guide.

Fix target#

Put your pole in the center of the target.


tip

Level your pole using a bubble level.

Collect point#

In ReachView Survey tool press the Collect button and save your GCP. Repeat the procedure for as many GCPs as you need.

Export#