Skip to content

Power supply

Reach Module has been replaced with Reach M+. Documentation for Reach M+ can be found here.

How to power Reach Module

Emlid Reach Module module can be powered using Micro-USB port or DF13 ports. Power circuit is shared for all ports, so when you power the device over one port it will pass power to other ports.


Do not plug two power supplies at the same time as it may damage the device.

Power supply over USB

You can power Reach over Micro-USB cable using power supplies like:

  • Power bank
  • USB wall adapter
  • Computer USB ports

Powering using DF13 ports

Reach can be powered by providing 5 Volts to corresponding pins on any of the two DF13 ports.

When Reach is powered over DF13 port it will pass power to devices connected to Micro-USB OTG port such as flash drives, 3G\4G modems, USB radios etc.